EVGA Classified SR-2 User Manual
Page 13
EVGA Classified SR-2 Motherboard
13
3 - 2-Port SATA Power Cables
Allows a Molex power connector to adapt to a SATA power
connector.
1 - 4-Port USB Bracket
Provides one (4) additional USB ports on the rear of the case.
6 - SATA Data Cables
Used to support the Serial ATA protocol and each one connects
to a single drive to the motherboard.
1 - IDE-ATA 133 HDD Cable
Passes data between the IDE connection on the motherboard
and IDE device.
1 - 2-Way SLI Bridge
Bridges two (2) graphic cards together which allows for
2-Way SLI.
1
– 3-Way SLI Bridge
Bridges three (3) graphic cards together which allows for 3-Way
SLI.
1
– 4-Way SLI Bridge
Bridges four (4) graphic cards together which allows for 4-Way
SLI. (on select card models)
1
- Installation CD
Contains drivers and software needed to setup the
motherboard.