Eiki WL-30(XG-705A) - Manual (Page 75)

75
10. How to Use the PJ Controller
Initial Settings
Before using the PJ Controller function, initial setting is required.
1. Select Initial Setting from the main menu and configure each item.
Parameter Description
Language ........................................Select a desired language from the pull-down menu, and click “Set”.
Temperature ................................Set the unit of temperature displayed on the control screen of the
projector. Select “Centigrade” or “Fahrenheit” from the pull-down
menu and click “Set”.
Comment ........................................You can store any comments regarding the initial settings. To save the
comments you entered, click “Save”.