Enviro Kodiak 1700 Freestanding - Manual (Page 29)

29
Installation
The flue collar is removable for installations
into fireplaces with low openings.
a) Remove the first two (2) front secondary
air tube and ceramic baffles, if installed
(see C
ERAMIC
B
AFFLE
I
NSTALLATION
).
b) Unscrew the nut on top of the inside
of the firebox, using a 9 /
16
” wrench or
socket (see Figure 31). The flue plate
clamp will slide off the hook/clamp.
c) Pull the hook/bolt and the removable
flue collar off the top of the unit.
Figure 32: Attaching removable flue.
Figure 33: Leveling leg.
Nut
Hook/bolt Flue plate clamp
d) Attach the flue collar to the venting pipe using
sheet metal screws.
e) Push the unit into place while trying to keep the
collar attached to venting close to the opening
on the top of the unit.
f) Using the hook/bolt, grab the flue collar by the
rod through the center and pull it into place (see
Figure 32).
g) Slide the flue plate clamp over the end of the
hook/bolt and screw the nut back on to the
hook/bolt.
h) Re-install ceramic baffles and the first two (2)
front secondary air tube (see C
ERAMIC
B
AFFLE
I
NSTALLATION
).
3. There are two (2) leveling legs (shown in Figure 33),
one on each side, at the back of the unit. Adjust the
legs using a 9 /
16
” wrench to ensure the unit is stable.
Figure 31: Attaching removable flue.
4. Screw or nail the metal plate provided by the manufacturer to the
inside of the fireplace.
METAL TAG: “THIS FIREPLACE HAS BEEN ALTERED TO ACCOMMODATE
A FIREPLACE INSERT AND SHOULD BE INSPECTED BY A QUALIFIED
PERSON PRIOR TO THE RE-USE AS A CONVENTIONAL FIREPLACE.”