Epson PL 735c - Manual (Page 11)

11
Connecting in IP Connect Mode
Even if your projector and computer are on a different subnet (Access
Point mode only) or connecting over different routers, you can
establish a connection manually using IP Connect Mode.
1. Start NS Connection on the computer to which you want to
connect. You see this screen:
2. Click the Extension button.
You see this screen:
note
Depending on your network,
your projector and computer
may connect over different
routers even if they are in
the same room. Try this
method if you are unable to
connect automatically.
Click here
Select this box
Bernslip.fm Page 11 Friday, December 12, 2003 3:02 PM