Epson PL 735c - Manual (Page 14)

14
Using Projector Groups
You can register projectors as a group if you want to provide quick and
easy access to other computers. You can also export or import group
information as a file to another computer. Projectors must be
connected to the network in Access Point mode, and must be on the
same network segment as the computer used to create the group, or
the computers that import or export group information.
Creating a Group
You can register up to 16 projectors as a group, and all projectors must
be part of your wireless network.
1. Start NS Connection. Then click the Extension button on the
EMP NS Connection screen. You see this screen:
2. Select Use IP connect mode and Use Group List .
tip
Use a static IP address when
configuring a projector for
the network if you plan to
use it in a group. If you use
DHCP, the projector’s IP
address will change every
time you turn it off and on
again, and you will have to
recreate the projector group.
Select these
two boxes
Bernslip.fm Page 14 Friday, December 12, 2003 3:02 PM