Edimax Technology EK-16RO - Manual (Page 14)

CONSOLE ON/OFF, etc…
a. The “ OSD: 10 SEC” means
that the OSD windows
display or PC system name
exists 10 sec. on your
monitor. You can modify it
from 05 sec to 99 sec. The
factory default value is 10
sec.. 15 ☼ SYSTEM 15 16 SYSTEM 16
OSD : 1 0 SEC. ( CHANGE PASSWORD
TAB : NEXT INSERT :EDIT
ESC : QUIT ENTER :COMPLETE
SCAN: 1 0 SEC. CONSOLE ON /OFF
b. The “ SCAN TIME” means that scan interval from one PC port to next PC port. The
default SCAN time is 10 sec and the maximum scan time is 99 sec.
c. The “ CHANGE PASSWORD” is for user to avoid all PC systems to be intruded by the
other person. The default password is 8 digits “ 00000000 “.
ESC : QUIT ENTER : COMPLETE
ENTER PASSWORD : █
There is an enter password window showed out when you select this item and then
press the Enter. The maximum password is eight digits. After you key in the
password already and press the Enter key, there is another window for confirming your
typed password.
ESC : QUIT ENTER : COMPLETE
ENTER NEW PASSWORD : █
ESC : QUIT ENTER : COMPLETE
RETYPE NEW PASSWORD : █
You need to retype the password again for rechecking your previous key-in password
is matched or not.
ESC : QUIT ENTER : COMPLETE
NEW PASSWORD COMPLETE
d. The “ CONSOLE ON/OFF “ means to manage the console of KVM switch. If you
select “ CONSOLE ON “, it means that any user can use the console. If you select
“ CONSOLE OFF “(factory default OFF state), it means that any user will not be
allowed to use the console unless you enter the password. When you enter the
password already and pass the KVM switch authentication, the CONSOLE will be set
to ON. After you finish using KVM switch, please don’t forget to set up CONSOLE
ON state to OFF state. Besides, if current CONSOLE is ON state and you reset KVM