Edimax Technology EK-16RO - Manual (Page 15)

switch, the CONSOLE will be set up ON state back to OFF state.
e.
W hen you finish the set up of PC name and get out of OSD setting mode, you will find
the PC name showed at the up-left corner of monitor. Now, you can use ESC key to
clear the message right away if you don’t need it.
☼SYSTEM 02 102
f. If you want OSD returning back to factory default value, you can execute “SCROLL
LOCK”, “SCROLL LOCK” , “R” keys in order. The Seven segment LEDs on the front
panel will be flashed during the refresh process.
ROM REFLASH
When the OSD value back to default setting, the seven segment LEDs on the front
panel will stop flashing