Epson R1800 - Manual (Page 3)

1
Diagram 1
Installing & Setting up the Epson R1800 printer
Diagram 3 Diagram 4
Diagram 5
Diagram 6
Diagram 2
1
2
1.
Install' from the menu, as in diagram 1 below.
2. When Diagram 2 appears click 'Adobe .ICC profiles'. Follow the on-screen instructions. The Adobe .ICC profiles
will be installed.
3. Now click the printer driver option, click OK as in diagram 3. Then click Europe as in diagram 4 and click OK. The driver
will now be installed.
4. The utility will now copy files to your computer. Make sure the USB cable is connected to the PC and printer, then
turn on the printer as instructed in diagram 5.
5. After the utility has found your printer it will confirm this as in diagram 6. The Epson R1800 has now been
successfully installed. Click OK.
6. From the Subli-Print R1800 CD open the folder where the Subli_Print_R1800_v1.2 profile is stored. Right click on the
profile and choose Install Profile. Note: It will not give any feedback once installed.
7. Please refer to page 2 to setup the driver for Subli-Print inks.
Insert the Epson Stylus R1800 software CD-ROM into your CD-ROM drive. The CD will auto run. Select 'Custom