Elo TouchSystems ET1529L - Manual (Page 24)

Optimizing the LCD Display
To ensure the LCD display works well with your computer, configure the display mode
of your graphic card to make it less than or equal to 1024 x 768 resolution, and make
sure the timing of the display mode is compatible with the LCD display. Refer to Appen-
dix A for more information about resolution. Compatible video modes for your
touchmonitor are listed in Appendix C.
Installing the Peripheral Device Drivers
Finger Print Reader
NOTE: This driver is for MS Windows 9x through XP.
1 On the TouchTools CD, browse to Touch Monitor Peripheral s\Finger
Print Readers\driver\EasyInstall\FDP02.
2 Double-click setup.exe
Follow the Install Shield Wizard procedure to complete the installation.
For a detailed software development kit, browse to Touch Moni tor
Peripherals\Finger Print Readers and open the following files:
. • FDxSDKforWindows1 .20.zip
. • SecuBSP SDK for Windows2 .10.zip
You will enter one of the following serial numbers depending on your operating system:
. • FDx SDK for Windows: 31-100s101-3586383
. • FDx SDK for Windows CE: 32-100s101-9713291
. • SecuBSP SDK for Windows: 41-100s101-7685871
. • SecuBSP SDK for Windows CE: 42-100s101-1155462
. • SecuBSP SDK: 51-100s101-5963137
Once the driver setup is complete, the demo program can be run from Touch Moni tor
Peripherals\Finger Print Readers\FPR Demo\BSPDemo.exe
2-18 Elo Entuitive Touchmonitor User Guide