Epson 730c - Manual (Page 31)

Using the Projector 25
Adjusting the Image
Once you see your image, you’ll need to make certain adjustments:
■ To focus or zoom your image, see below.
■ If the image is too high or too low, you can reposition it.
See page 26.
■ If the image isn’t square, see page 27.
Focusing and Zooming Your Image
Rotate the focus ring to sharpen the image.
Rotate the zoom ring to reduce or enlarge the image.
You can also change the image size by moving the projector closer to
or farther away from the screen. You can use the
E-Zoom buttons on
the remote control to zoom in on a portion of the image. See page 33
for instructions.
focus ring
zoom ring
720-730.book Page 25 Thursday, October 30, 2003 11:32 AM