Epson 730c - Manual (Page 86)

80 Appendix A: Connecting to Additional Equipment
Connecting the Mouse Cable
To use the remote control as a mouse, follow the steps below.
If the Macintosh has a built in USB port, you can use the USB mouse
cable that came with the projector.
1. Connect one end of the mouse cable to the projector’s USB port.
2. Disconnect your Macintosh’s mouse cable. Connect the other end
of the projector’s mouse cable to a USB port on your Macintosh.
720-730.book Page 80 Thursday, October 30, 2003 11:32 AM