Epson TC-1428 - Manual (Page 14)

9. Troubleshooting
Before you call an authorized service center, please check if the following
items are properly connected or not.
If a non-IBM personal computer or graphics adaptor is being used, make
sure the pin assignments of signal input connector and the signal timing
meet the specifications inducated above.
PROBLEM
No Picture or
POWER Indicator off.
No Picture,
POWER Indicator off,
AC cord plugged in,
POWER switch on.
LOCATION
R e a r
Front
Rear
Front
Front
Front
Front
No picture,
POWER Indicator on.
Image is not centered.
CHECKS
* AC Cord plugged in
* POWER Switch on
* Signal Cable connected
* Turn off POWER switch, wait
at least 30 seconds, turn it
back on.
* CONTRAST Control
* BRIGHTNESS Control
* V. POSITION Control
* H. POSITION Control
Front
- 1 3 -