EdgeStar CWR265SZ - Manual (Page 6)

5
Installation
 Clear unit of any loose packaging materials.
 Confirm you have all required loose parts and pieces.
 Place the unit on a flat, dry surface that is able to support the
unit while fully loaded.
 This unit is designed to be either recessed or free standing.
 Avoid placing heavy objects on top of the unit.
 The unit is not designed for use in a basement or garage.
 The unit is not designed to be in direct sunlight or near sources
of heat.
 Avoid placement near other heat-emitting appliances.
 Do not share outlets with other powerful appliances.
 Let stand for at least 24 hours before powering up to let cooling
materials settle.
 Gently clean the unit’s interior surface with warm water, using a
soft cloth before first use.
Operation
1. Insert racks into unit.
2. Adjust temperature.
3. Place bottles to be cooled inside unit.
4. Plug the power cord into a standard grounded electrical outlet.
5. Keep door closed to keep optimal temperature and conserve
energy.
6. Toggle the internal light by pressing the button on the front
control panel.
Important Note: Allow at least 24 hours for the internal
temperature to become adjusted properly before first use.