Emerson EWC19T4 - Manual (Page 40)

– 40 – EN
01A11
SPECIAL PLAYBACK FUNCTION
REPEAT
REPEAT TITLE / CHAPTER
To activate the repeat function press the
REPEAT button during playback.
¡ The repeat mode changes as described below every
time you press the button.
DVD-V
REPEAT is available only during playback.
CHAPTER TITLE OFF
(current chapter repeat) (current title repeat) (repeat off)
NOTES:
¡ Repeat Title/Chapter is not available with some
scenes.
¡ The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK/ALL
To activate the repeat function press the
REPEAT button during playback.
¡ The repeat mode changes as described below every
time you press the button.
CD
TRACK ALL OFF
(current track repeat) (entire disc repeat) (repeat off)
NOTES:
¡ Repeat setting will be cleared when moving to other
track.
¡ Repeat playback does not function during repeat A-B
playback.
REPEAT A-B
1 Press the REPEAT A-B button at your cho-
sen starting point.
¡ “ A-” appears briefly on the TV screen.
2 Press the REPEAT A-B button again at your
chosen end point.
¡ “ A-B” appears briefly on the TV screen and the
repeat sequence begins.
3 To exit the sequence, press the REPEAT
A-B button.
NOTES:
¡ The repeat A-B section can only be set within the cur-
rent title (for DVDs) or current track (for Audio CDs).
¡ Repeat A-B is not available with some scenes in DVD.
¡ To cancel the A point which was set, press the
CLEAR button.
¡ Repeat A-B playback does not function during title,
chapter, track or all repeat playback.
CD DVD-V
PROGRAM
You may determine the order in which tracks will play.
1 In stop mode, press the MODE button.
¡ The PROGRAM screen will appear.
2 Press the Arrow button ( K / L ) to select a
track, then press the
ENTER button.
¡ Press the CLEAR button to
erase the most recently entered
program.
3 Repeat step [2] until you have selected all
the tracks you want to play in the program.
4 Press the PLAY button to play the pro-
grammed tracks.
NOTES:
¡ While the program is being played back, the STOP
works as follows.
¡ Press the STOP button once and then the PLAY but-
ton again, playback will restart from the point where
the STOP button was pressed. (Program continued)
¡ Press the STOP button twice and then the PLAY
button again, playback will restart from the track in
the usual way. (Program canceled)
¡ Up to 99 programs can be entered.
¡ To erase all tracks in the program at once, select
ALL CLEAR at the bottom of the list at Step [2].
¡ If you like to repeat the current track in the program,
press the REPEAT button repeatedly until “
TRACK”
appears during playback. If you like to repeat the entire
program press the REPEAT button repeatedly until
“
ALL” appears during playback.
CD
TOTAL
RANDOM PLAYBACK
This shuffles the playing order of tracks instead of
playback in the sequence.
1 In stop mode, press the MODE button twice.
¡ RANDOM screen appears.
2 Press the PLAY button to start random playback.
NOTE:
¡ If you like to repeat the current track in the random
selection, press the REPEAT button repeatedly until
“
TRACK” appears during playback. If you like
to repeat the entire random selection press the
REPEAT button repeatedly until “
ALL” appears
during playback.
CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
T0052UC(P36-52).QX3 04.9.16 2:12 PM Page 40