Gt-5500 rev.c, Initialization methods – Epson GT-5500 User Manual
Page 48
Advertising
Initialization Methods
The scanner can be initialized (returned to a fixed set of conditions) in the
following ways:
Hardware initialization
* When the scanner is turned on.
* When the scanner receives a SCSI Reset
signal from the SCSI interface.
* When you push the RESET button.
Software initialization
*
When software sends the ESC @ (initialize
the scanner) command.
*
When the scanner receives a SCSI Bus
Device Message.
L
GT-5500 Rev.C
A5 size
Appendix A
July-18-97
Pass 0, DR
A-6
Technical Specifications
Advertising