Epson PhotoPC 850Z - Manual (Page 60)

2-32 Taking Pictures
L Proof Sign-off:
BLE H.Kato E.Omori
F.Fujimori
SEI M.Kauppi R4C4410
Rev. C
A5 size PICTURES.FM
2/11/00 Pass 3
Selecting slow synchro timing
You can select flash timing for slow synchro. The
leading synchro is a normal setting that is suitable for
most cases. The trailing synchro is a special setting that
is effective in expressing motion. Follow the steps
below to select the slow synchro timing.
1. Turn the camera’s dial switch to .
2. Press Shot SETUP.
3. Press Synchro Flash to select Leading or Trailing.
4. Press BACK to return to the previous screen.
Note:
❏
You cannot select the slow synchro timing when the
Full Auto camera mode is selected.
❏ To use the selected timing, select slow synchro for the
flash. See “Setting the flash” on page 2-9.
Selecting the internal or external flash
The PhotoPC 850Z has a convenient built-in flash. It
satisfies ordinary flash needs. If you need more light,
you can attach an external flash, which is available as
a camera accessory sold separately, to the PhotoPC
850Z.
Slide the mounting foot of the flash into the hot-shoe
attachment on the top of the PhotoPC 850Z and secure
the lock mechanism. For details about the flash, see its
user’s guide.
w
Warning:
Be sure to turn off the camera and flash before
connecting them.
Follow the steps below to select the internal or external
flash.
1. Turn the camera’s dial switch to .
2. Press Shot SETUP.
Slide in and secure connection.