Front wheel mount, Front wheel bearings, Deck spindles – Husqvarna 96521501 User Manual
Page 45: Transmission, Lubrication
45
lUBRICATIoN
Front Wheel Mount
lubricate with a grease gun, one zerk for each wheel
mount, until the grease is forced out.
Use only good quality bearing grease.
Grease from well-known brand names (petrochemical
companies) usually maintains a good quality.
Front Wheel Bearings
lubricate with a grease gun, one zerk for each set of
wheel bearings, until the grease is forced out.
Use only good quality bearing grease.
8058-068
Lubricating the front wheels
8011-732
Deck spindle
IMPORTANT INFORMATION
Use minimal lubrication and remove excess
lubricant so that is does not come into contact
with belts or belt pulley drive surfaces.
Deck Spindles
lower the cutting deck completely.
If a grease gun without a rubber hose is used, the foot
plate must be removed.
lubricate with a grease gun, 2-3 strokes per spindle.
Transmission
The transmission is maintenance free with no need for
level checks or oil changes. If a leak occurs, replace
the unit or contact your Husqvarna dealer.