Humminbird 300 SERIES 365I - Manual (Page 30)

20
S Sc crre ee en n S Sn na ap pssh ho ottss
Screen Snapshots are saved pictures of the view on the screen. The screen
snapshot will include the menus, dialog boxes, warnings, and messages that
were active when the screen snapshot was taken. Saved Screen Snapshots can
be viewed from the Snapshot and Recording View or Chart View.
The Screen Snapshot feature is available when an optional-purchase MMC/SD
card is installed and Screen Snapshot is On (see Setup Menu Tab, Screen
Snapshot).
Make a Screen Snapshot:
1. Activate Screen Snapshot and
install an MMC/SD card.
2. From any view or cursor location
you want to capture, press the
MARK key. The screen will pause
while the image is saved.
A waypoint will also be created at
the boat or active cursor location.
The screen snapshot shares the
same file name (.PNG).
Delete a Screen Snapshot:
1. From the Snapshot and Recording
View, press the UP or DOWN
Cursor keys to scroll through the
saved files and highlight a
snapshot file.
2. Press the Menu key once, and
select Delete Image from the
X-Press™ Menu.
3. Press the RIGHT Cursor key.
NOTE: Navigation is not affected by the Screen Snapshot feature. Also, if Screen Snapshot is
enabled, but a GPS receiver is not connected, pressing the MARK key will capture the screen
image but an error will display that says a GPS position fix is required to create a waypoint.
Delete a Screen Snapshot
From Snapshot
and Recording
View, select
Delete Image
from the
X-Press™ Menu.
Make a Screen Snapshot
Waypoint saved
at Cursor
Location
Screen Snapshot
Confirmation
File Name
Views