Humminbird 300 SERIES 365I - Manual (Page 76)

66
Clear Current Track
Settings: Follow screen instructions to activate.
Clear Current Track allows you to clear the current track on the display and
start a new track at the present position.
Save Current Route
(only when Navigating)
Settings: Follow screen instructions to activate.
Save Current Route allows you to save the current route being displayed. This
menu option will only appear when you are currently navigating a route.
Skip Next Waypoint
(only when Navigating)
Settings: Follow screen instructions to activate.
Skip Next Waypoint removes the next waypoint from the current route. This
menu option will only appear when you are currently navigating a route.
Cancel Navigation
(only when Navigating)
Settings: Follow screen instructions to activate.
Cancel Navigation discards the current route and exits Navigation Mode. This
menu option will only appear when you are currently navigating a route. This
will not delete a previously-saved route.
Remove Target
(only if a Target is Active)
Settings: Press the RIGHT Cursor key to activate.
Remove Target removes the waypoint target from the display. This menu option
will only appear when a target has already been applied to a waypoint.
NOTE: See Introduction to Navigation: Add a Waypoint Target or Trolling Grid for
more information.
Navigation X-Press™ Menu