HP 441877-00F User Manual
Page 56
Configuration and diagnostics 56
0—Driver operates in normal mode
1—Driver operates to reduce the number of spurious interrupts
o
Default = 1
NOTE:
The minimum threshold for acceptable number of spurious interrupts is 200 interrupts
per second, which is the default value of the environmental variable "set display spurious
interrupt alerts threshold."
•
RXCHECKSUM. This keyword is used to enable or disable the offload of Receive Packet Checksum
verification to the adapter. This automatically loads for 10/100 adapters.
o
Syntax: RXCHECKSUM=n
Where n = 0 or 1
0—Does not offload Rx Checksum verification to the adapter
1—Offloads Rx Checksum verification to the adapter
Default = 0
Advanced Network Services help - supported keywords
•
AGG_SELECTION
o
Syntax: AGG_SELECTION=[BANDWIDTH | COUNT]
o
Description: Sets active aggregator selection mode by bandwidth or count
•
BALANCE_INTERVAL
o
Syntax: balance_interval=nnn
o
Description: Changes Balance interval, nnn counts 1/18 sec
•
BALANCE_SET_DEFAULT
o
Syntax: balance_set_default
o
Description: Restores Balance interval to factory settings
•
COMMIT
o
Syntax: commit [team=nnn]
o
Description: Sets a certain mode. Use after binding to base drivers with Team=nnn.
•
DELAY
o
Syntax: delay=nnn
o
Description: Delays the commit in nnn seconds
•
FRAME
o
Syntax: frame=[ETHERNET_802.2 | ETHERNET_802.3 | ETHERNET_II | ETHERNET_SNAP]
•
HELP
o
Syntax: -H
o
Description: Displays Help
o
Example: CPQANS -H
•
JOIN_INDIVIDUALS
o
Syntax: join_individuals=[yes | no]
o
Description: Joins all individual links to one aggregator