Horizon Fitness RCT7.6 - Manual (Page 10)

10
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
* NOTE: Be careful not to pinch any
wires while assembling the masts.
A) Open HARDWARE BAG .
B) Place the CONSOLE on
CONSOLE MASTS.
C) Place 2 FLAT WASHERS (E) and
2 BOLTS (D) into side of left
CONSOLE MAST and CONSOLE
and lightly tighten.
D) Gently lift right side of the
CONSOLE to connect the
CONSOLE CABLE. Carefully tuck
wires in mast to avoid damage.
*NOTE: Do not pinch console
cable. Be sure the console cable
prongs are aligned and the ends
are tightly seated into each
other.
E) Repeat step C above to secure
the console to the RIGHT
CONSOLE MAST.
F) Tighten all bolts completely.*
ASSEMBLY STEP 
BOLT (D)
13 mm
Qty: 4 FLAT WASHER (E)
Qty: 4
HARDWARE BAG  CONTENTS :
BOLT (D)
FLAT WASHER (E)
CONSOLE MAST
CONSOLE CABLE
ASSEMBLED IN STEP 4-D