Horizon Fitness RCT7.6 - Manual (Page 11)

11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
YOU’RE FINISHED!
ASSEMBLY STEP 
SCREW (F)
CONSOLE TRIM PIECE
SCREW (F)
12 mm
Qty: 6
HARDWARE BAG  CONTENTS :
A) Open HARDWARE BAG .
B) Place left CONSOLE TRIM PIECE
onto the CONSOLE.
C) Place 3 SCREWS (F) into side of
left CONSOLE TRIM PIECE and
tighten.
D) Repeat step C above to secure
the right CONSOLE TRIM PIECE
to the CONSOLE.
E) Connect power plug to the
treadmill and connect the cord to
a power outlet. The on/off switch
is located next to the power
cord. Flip this switch to the ‘ON’
position, so that the switch is
lit. You will hear a beep and the
console will light up.