HONDA HRC216PDA - Manual (Page 18)

18
AIR INDEX
An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating to the engine’s emission durability period. The descriptive
term indicates the useful life period for the engine’s emission control
system. See your EMISSION CONTROL SYSTEM WARRANTY
(page 21) for additional information.
SPECIFICATIONS
Mower Model
Maintenance
Tuneup
Dimensions, Weights, and Capacities
Engine Design and Performance
Descriptive Term
Applicable to Emission
Durability Period
Moderate 50 hours (0 ~ 80 cc)
125 hours (greater than 80 cc)
Intermediate 125 hours (0 ~ 80 cc)
250 hours (greater than 80 cc)
Extended 300 hours (0 ~ 80 cc)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
HRC2163PDA Push type, flywheel brake, recoil
starting, twin blades, grass bag,
and mulch plug
Fuel
Unleaded gasoline with a pump
octane rating of 86 or higher.
page 14
Engine Oil SAE 10W-30, API SJ or later page 11
Spark Plug Type NGK - BPR5ES page 12
Maximum
Governed Speed * 3,100 rpm + 50/-150 rpm Shop
manual
Blade Control
Cable Adjust for 1-3/16 ~ 1-3/8 in
(30 ~ 35 mm) free play at the
blade control lever.
page 13
Throttle Cable Adjust for proper choke operation. page 13
Blade Bolt Torque 36 ~ 43 ft-lb (49 ~ 59 N•m) page 10
* Do not try to increase the engine speed above the maximum
governed speed; the blades could fracture and come apart.
Spark Plug Gap 0.028 ~ 0.031 in
(0.7 ~ 0.8 mm)
page 12
Idle Speed 1,700 ± 150 rpm Shop
manual
Valve Clearance
(cold) Intake:0.15 ± 0.02 mm
Exhaust:0.20 ± 0.02 mm
Shop
manual
Other Specifications No other adjustments needed.
Overall Length 65.0 in (1650 mm)
Width at Mower Deck 23 in (585 mm)
Overall Height 39.2 in (995 mm)
Dry Weight 97 lb (44 kg)
Cutting Width 21.3 in (541 mm)
Approximate Cutting
Heights 3/4 in (19 mm), 1 in (25 mm)
1-1/2 in (39 mm), 2 in (46 mm),
2-1/2 in (62 mm), 3 in (75 mm),
3-1/2 in (88 mm), 4 in (100 mm)
Fuel Tank Capacity 0.25 US gal (0.93
)
Engine Oil Capacity
0.58 US qt (0.55
)
* Refill amount: 12.0 ~ 13.5 oz
(0.35 ~ 0.40
)
Grass Bag Capacity 23.2 US gal (2.5 bushels; 87.8
)
* Actual amount will vary due to residual oil remaining in the
engine. Always use the dipstick to confirm the actual level (see
page 11).
Engine Model GSV160
Engine Type
4-stroke, overhead-cam,
single-cylinder, forced air-cooled
Displacement 9.8 cu in (161 cc)
Bore and Stroke 2.5 x 2.0 in (64 x 50 mm)
Compression Ratio 8.5:1
Ignition System Transistorized magneto