haier PRO XS3 309292L - Manual (Page 45)

Accessories
309292L 45
Gun Accessories
Gun Repair Kits
244781 Air Seal Repair Kit
244911 Fluid Seal Repair Kit
Round Pattern Kits
Consists of fluid tip, diffuser and air cap.
245217 4-6 in. (102-152 mm) diameter
245219 8-10 in. (203-254 mm) diameter
Push/Pull Fan Air Valve
244912 For quick change of fan size.
ES Always On Kit
244913 Replaces inlet fitting with ball valve to shut
off air during flushing. Converts ES ON/OFF
valve to always ON condition.
Handle Grips
245263 Medium Grip
245264 Large Grip
Gun Washer Kit
245270 Use to convert Graco gun washers so they
can clean PRO Xs3 and PRO Xs4 air spray
guns.
Pressure Cups
Includes air regulators for gun atomization air and sup-
ply air to pressure cup.
244731 1 Quart (0.95 Liter)
244732 2 Quart (1.90 Liter)
Gun Valve Lubricant
111265 4 oz (113 g) tube of sanitary (non-silicone)
lubricant for fluid seals and wear areas.
Alternator Bearing Kit
223688 To repair the turbine alternator.
Cleaning Brush
105749 For cleaning air cap and fluid nozzle.
Abrasive Material Electrode Needle
277060 Optional replacement Electrode Needle is
available for abrasive materials.
Miscellaneous Accessories
Ground Wire and Clamp
222011 For grounding pump and other components
and equipment in the spray area.
12 gauge, 25 ft (7.6 m).
Megohmmeter
241079 500 Volt output; 0.01-2000 megohms.
Not for use in hazardous areas.
Paint Resistance Meter
722886 Use with 722860 Paint Probe to measure
resistance of paint.
Not for use in hazardous areas.
Paint Probe
722860 Use with 722886 Paint Resistance Meter to
measure resistance of paint.
Not for use in hazardous areas.
Safety Warning Signs
180060 English Warning Sign. FM Approved. Avail-
able at no charge from Graco.
Instruction Signs
198309 English Setup Instructions.
198319 English Daily Care Instructions.
Electrostatic Conductive Gloves (box of 12)
117823 Small
117824 Medium
117825 Large