HP Color Copier - Manual (Page 10)

2-2 Setting Up Your New HP Color Copier
3 Verify that the following items are included with your HP Color Copier:
a Power supply (AC/DC adapter) with attached cord
(HP part number 0950-2880)
b Power cord
c Front-panel overlay with text on it
d One black and one color print cartridge
If any of the items are missing or damaged, contact the dealer from whom
you purchased your HP Color Copier.
4 Choose a location and environment for your HP Color Copier.
◆ Use your HP Color Copier only within normal office temperature
and humidity ranges. For recommended ranges, see “Environmental
Specifications” in Chapter 8.
◆ Avoid direct sunlight or locations where a quick change in
temperature might cause condensation inside the unit.
◆ Make sure the location is well ventilated. Dust, gases, or fumes
(such as ammonia or paint thinner) can damage the unit.
◆ Choose a site that is level, flat, and stable. The HP Color Copier
vibrates and needs to be on a sturdy surface.
◆ Be sure a grounded outlet is nearby and easily accessible.
◆ If your unit has an automatic document feeder (ADF), make sure
that you can open the lid all the way by placing your HP Color
Copier at least 9 inches (230 mm) from the wall.
b a
c
d
WSGCh1.fm Page 2 Wednesday, December 23, 1998 12:25 PM