HP BL685C G6 - Manual (Page 32)

Hardware options installation 32
IMPORTANT: Processor sockets 1 and 2 must always be populated. If either processor socket
is empty, the server blade does not power up.
To install a processor:
1. Power down the server blade (on page 15 ).
2. Remove the server blade (on page 16 ).
3. Remove the access panel (on page 17 ).
4. Remove the SAS hard drives (" Remove the SAS hard drive " on page 17 ), if installed.
5. Remove the SAS controller, if installed.
6. Remove the front bezel.