HP BL685C G6 - Manual (Page 48)

Hardware options installation 48
o Hot-plug SAS controller option
o Mezzanine card controller option
7. Install the access panel (on page 17 ).
8. Install the server blade (" Installing a server blade " on page 29 , " Remove the server blade " on page
16 ).
9. Power up the server blade (on page 15 ).
HP Trusted Platform Module option
Use these instructions to install and enable a TPM on a supported server blade. This procedure includes
three sections:
1. Installing the Trusted Platform Module board (on page 49 ).
2. Retaining the recovery key/password (on page 50 ).
3. Enabling the Trusted Platform Module (on page 51 ).