HP BL685C G6 - Manual (Page 43)

Hardware options installation 43
o Mezzanine 3
7. Install the access panel (on page 17 ).
8. Install the server blade (" Installing a server blade " on page 29 , " Remove the server blade " on page
16 ).
9. Power up the server blade (on page 15 ).
SAS controller option
IMPORTANT: Installation of SATA SSD drives and hot-plug SAS drives at the same time is not
a supported configuration in this server blade.
To install the controller:
1. Power down the server blade (on page 15 ).
2. Remove the server blade (on page 16 ).
3. Remove the access panel (on page 17 ).