Handspring Treo 600 - Manual (Page 15)

Making your first call
We recommend that you charge your Treo for a full three hours (or until the
LED is solid green) before using it for the first time.
1. Press and hold the Wireless Mode button
. You will hear a series of
ascending tones.
2. If a Welcome screen appears, follow the onscreen instructions to set up
your Treo.
3. Allow the Treo to complete a network search. The search may take several
seconds. When it is complete, the network status icon appears in the
upper right.
4. If prompted for a PIN, enter it on the PIN screen. The default PIN is often
1234. Otherwise, your mobile service provider may have given you some
documentation with this information. Contact your mobile service provider
for help.
5. Press Phone .
6. Using the number pad on the Treo keyboard, type the desired phone
number.
7. Press Center to dial.
8. When your call is complete, use the 5-way navigation control to choose
Hang Up.
Making your first call :: 15
If No Service appears in the
upper left, you are out of a
wireless coverage area. If
you believe you are in a
wireless coverage area and
this problem persists, contact
your mobile service provider
for assistance.
If the Welcome screen does
not appear, recalibrate the
touchscreen. This ensures
that the screen responds
accurately to taps (see
page 133).
Learn how to quickly redial
your most recent calls on
page 38.