Handspring Treo 600 - Manual (Page 28)

Connecting your Treo to your computer
1. Plug the AC charger into a wall outlet. If necessary connect an adapter.
2. Connect the charger to the short end of the HotSync cable. Be sure to
match the sides of the connectors labeled UP.
3. Plug the USB HotSync cable into an available USB port on your
computer.
4. Connect the long end of the HotSync cable to the bottom of your Treo
with the button facing up.
A. USB cable
B. HotSync button
28 :: Setting up your computer
For best performance, plug
your USB synchronization
cable directly into a USB
port on your computer. If you
use a USB hub, make sure it
is a powered hub.