HP 5400c Series - Manual (Page 93)

Back to TOC Troubleshooting and maintaining 93
Images scanned from the HP Precisionscan Pro software are larger
than the original when viewed or printed from another program,
such as MS Paint, MS Internet Explorer, or MS Imaging.
The other program did not accept the image size information. Scan
the image at a lower resolution. When you scan at a resolution the
program accepts, it will display or print the image at the correct
size.
The image is too big or too small.
In the HP Precisionscan Pro software, set the output dimensions in
the Resize dialog box. See
"Resizing (output dimensions)" on
page 45 .
When I try to scan to the Web from the HP Precisionscan Pro
software, the image is too large or does not look good on screen.
Scan settings for this image might be set incorrectly. Use the
Guided Steps for help choosing an output type. See also
"Tips for
best image quality" on page 67 .
Resolving issues with printed copies
Use this section to help resolve issues with printed pages.
Parts of the page around the edges are not printing.
Printers cannot print right up to the edge of the paper. To get the
image to fit inside the printable area, you must slightly reduce the
size of the image in the HP Precisionscan Pro software and then
reprint the image.