HONDA FG100 - Manual (Page 11)

Transport Wheels
The transport wheels are used to move the tiller
around. Before tilling, the transport wheels must be
removed and the drag bar installed in their place.
Carrying Handle
Hold the rubber grip on the carrying handle when
starting the engine.
The carrying handle can be used to load/unload
the tiller, and to assist in certain engine
maintenance procedures.
Recoil Starter Grip
Pulling the starter grip operates the recoil starter to
crank the engine for starting.
Drag Bar
The drag bar is used to control the forward action
of the turning tiller tines. The drag bar can be
adjusted to control the tilling depth of the tines.
Tine Spacers (included with tiller)
The two outer tines can be removed to give you a
narrower cultivating width. This will give you the
ability to get between very closely spaced plants.
TRANSPORT
WHEELS
CARRYING
HANDLE
RECOIL
STARTER
GRIP
DRAG BAR
OHV
TINE SPACERS
CONTROLS
FG100 TILLER
9