Section 5 − installation, 1. installing work clamp – Hobart Welding Products HANDLER OM-947 User Manual
Page 17
Advertising
OM-947 Page 13
SECTION 5 − INSTALLATION
5-1. Installing Work Clamp
1
Nut
2
Work Cable From Unit
3
Work Clamp
4
Screw
5
Work Clamp Tabs
Bend tabs around work cable.
6
Insulator Grip
Slide one insulating grip over work
cable before connecting to clamp.
Slide insulating grips over handles.
Ref. 802 456
.
Connection hardware must be tightened with proper tools. Do not just
hand tighten hardware. A loose electrical connection will cause poor
weld performance and excessive heating of the work clamp.
1
2
3
4
5
Tools Needed:
7/16 in.
6
7/16 in.
Advertising