Ishwasher – Hotpoint FDW65 User Manual
Page 21
21
D
ISHWASHER
General
Unusual Amount of foam is created
Has the correct detergent been used? (Use only Dishwasher powder
or tablets).
Have you spilt rinse aid when fill the rinse aid compartment? If yes,
this will clear on the next cycle.
Has there been a power failure, check other appliances?
Your dishwasher will stop and start throughout the wash programme.
This is normal.
Has the water supply been interrupted?
Spray arm knocking against dishes (See “Loading Your Dishwasher”
Section of the instruction book).
Crockey has not been stacked correctly.
This is caused by the way you have the water pipes laid and has no
effect upon the dishwasher functions.
If your cold water mains pressure is set too high, the noise level will
be increased.
Dishwasher Stopping During
Cycle
Knocking Noise coming from
Dishwasher
Knocking Noise Coming from Inlet
Valves
See “Key Contacts” on the back page of the instruction book.
If you have completed all of the above checks and your appliances is still not operating, then please call your
Service Centre for assistance.