Hoover S1349 - Manual (Page 12)

How to connect
To use the cleaner with tools,
disconnect the power nozzle
from the hand grip.
Tools may be attached directly
to the hand grip. With the latch
in the unlock position, insert
tool (or wand if extra length is
needed), then push latch to the
lock position to secure.
To remove the tool (or wand),
push the latch to the unlock
position.
To connect tools to metal wands,
insert end of tool into wand and
snap into position. To disconnect,
press down on the center of spring
latch and remove tool.
How to store
cleaner
The cleaning tools are conveniently
stored in the cleaner, as shown. To
replace the wall/floor brush, be sure
to turn the nozzle connector toward
the cord rewind pedal before
pushing the brush in place.
To save storage space, stand the
cleaner on end and hook wand
storage clip on bottom of cleaner.
The nozzle must be positioned
down as shown.
Lift up on wand to remove storage
clip from cleaner.
11