Hoover S1349 - Manual (Page 7)

2. Attach
nozzle and
wands
Attach wand with wand storage clip
to power nozzle by fitting button
projection on nozzle connector into
opening near end of wand. Be sure
nozzle is locked in place.
To release, press down on center of
latch and remove nozzle.
Attach second wand to the first.
Position cord into cord clips on
wands, placing excess cord
between nozzle and bottom cord
clip.
Note: Bottom cord clip is on wand
storage clip.
To attach the hose to the extension
wands, push the wand/tool la ch on
the hand grip to the unlock a sym-
bol.
Push the hand grip down onto wand
so that the button projection fits into
the slot. Push the latch to the lock
symbol to secure wand.
Push plug on power nozzle cord
completely into receptacle
hand grip.
Always disconnect cleaner from
electrical outlet before attaching
or removing power nozzle plug.
6