Hypertec HYNEP61056 - Manual (Page 7)

Static Electricity Warning
Static electricity is accumulated naturally in the human body, and can be discharged
through electrical components by touching them. This shock can potentially cause
permanent internal damage to the component.
When installing the adapter, please observe the following precautions:
Discharge yourself before commencing by touching a grounded metal appliance, such as
the metal frame of a computer - while it is tuned off, but still plugged into the wall socket.
Hold the adapter or any other boards by their edges only. Never touch any exposed pins on
the adapter.
If possible, install the adapter as soon as you remove it from its anti-static bag, without
putting it down. If you must put it down, place it on the anti-static bag in which it was
packed.
Do not place the adapter on any metal surface.
Installation Procedures
To install the WMPC56 PC Card follow the instructions on the Online User Guide. To do
so, install the Online User Guide.
1. Start Windows.
2. Insert the WMPC56 distribution diskette into the PC diskette drive.
3. From the TaskBar click Start and then click Run
4. Type A:\SETUP and click OK.
5.
Follow the Help utility’s on-screen instructions for the setup process.
The Drivers for the card come on a single disc, and for Windows 95 there are two different
drivers available. For users of WIN95B (Osr2) then use the drivers in A:\WIN95b
otherwise use the drivers in WIN95a.