Hayes Microcomputer Products DIVA T/A ISDN - Manual (Page 40)

DIVA T/A ISDN Modem User’s Guide 40
Specify information about Phone 1 and Phone 2. Use the table
below as a guideline.
Parameter Description
This phone line is
used for a
fax/modem only Selecting this option:
•
Enables “3.1KHz Audio”. This
specifies that the ISDN network has
to preserve the quality of the 3.1KHz
voice band that is required for data
audio signals such as Faxes and
Modems.
•
Disables calling features such as: Call
Forward, Call waiting, Caller ID, and
3-Way Conferencing. (North America
only)
•
Disables Dial Access (North America
only)
Enable distinctive
ring Changes the sound of the phone’s ring.
This lets you distinguish calls received on
Phone Line 1 from calls received on
Phone Line 2.
Notes:
•
Select Distinctive Ring on only one
phone, otherwise both will ring the
same.
If your modem, fax, or telephone has
difficulty detecting incoming voice calls,
try toggling the distinctive ring feature.
Enable VoiceMail
(North America
only)
Enable this option to ensure all incoming
calls are forwarded to your VoiceMail
box.
Region
(International/Euro
firmware only)
Specifies the country where you are
located. This ensures that the DIVA T/A
implements the ring pattern (and other
analog device parameters) suited to your
country. If your country is not listed, use
the default, International.
If problems persist, try configuring this
parameter using the AT commands AT*F
and AT!L. See the DIVA T/A ISDN
Modem Reference Guide.