HP PAVILION NX9005 - Manual (Page 60)

Service Manual Removal and Replacement 2-27
3. Turn the notebook bottom side up with the front facing forward.
4. Remove the following M2.5×4.0mm screws:
• One from the battery bay
• One from the hard disk drive bay
5. Remove the remaining 14 M2.5×6.0mm screws.
6. Turn the notebook top side up with the rear panel facing forward.
7. Remove the two M2.5×4.0mm screws from the rear panel.
8. Remove the two M2.5×6.0mm screws from the top case.
9. Lift the top case off of the notebook and then disconnect the touch pad cable from the motherboard.
Figure 2-18. Removing the Top Case
HP Pavilion ze4x00, HP nx9005 and nx9000,
Compaq Evo Notebook N1050v and N1010v, and
Compaq Presario 2100 and 1100 Models