Diagnostic tools, Diagnostic tools -18, E-diagtools diagnostic program – HP PAVILION NX9005 User Manual

Page 115

Advertising
background image

3-18

Troubleshooting and Diagnostics

Service Manual

Diagnostic Tools

This section describes the following diagnostic tools you can use for troubleshooting and repairing the
notebook:

• Notebook e-Diagtools diagnostic program (below)
• Power-on self-test (page 3-20)
• Sycard PCCtest 450 PC card (page 3-26)
• Windows Management Instrumentation (page 3-27)
• BIOS Setup utility (page 3-27)

e-Diagtools Diagnostic Program

The hardware diagnostic programs provide two levels of testing:

• User-level testing using a basic hardware test.
• Advanced testing using individual hardware tests.

The tests are designed to run after the system reboots, so that the notebook will be in a predictable state
during the tests. The tests are non-destructive, and are intended to preserve the state of the notebook. The
notebook reboots when you exit the program so drivers can be loaded.

Updating e-Diagtools

You can download the latest version of e-Diagtools using e-Diagtools for Windows.

Running e-Diagtools

The following procedure describes how to run e-Diagtools. The individual steps might differ slightly for
different versions of e-Diagtools.

1.

Select Start > Turn Off Computer (Shut Down) or Restart.

2.

When the HP logo appears, press

F10

to start the diagnostic test.


The first time you run the program, you are prompted to select the language for the program.

3.

When the menu appears, press

F2

to run e-Diagtools.

4.

When the Configuration Description appears, check the list of detected hardware.

5.

Run the basic test. Press

F2

to start the basic hardware test. The results appear when the test is

complete.

6.

If you intend to exit without running the advanced tests, press

F4

to view the Support Ticket.

Press

F3

to exit e-Diagtools.

7.

Optional: run the advanced tests. Press

F2

to open the advanced test screen.

8.

Use the arrow keys and

enter

to select the test you want to run. Tests are listed only for detected

hardware.

9.

Press

F2

to run the selected tests and add the results to the Support Ticket.

Advertising
This manual is related to the following products: