Honeywell TE103NL User Manual

Page 5

Advertising
background image

18

17

20

19

STANDARD WARRANTY INFORMATION

This product is warranted from manufacturing defects

for one year from date of retail purchase. It does not

cover damages or wear resulting from accident, misuse,

abuse, commercial use, or unauthorized adjustment and

repair.

Note that online product registration is required to

ensure valid warranty protection.

To register your product, go to our Company website

at: www.honeywellweatherstations.com. Click Online

Product Registration under the Customer Service menu.

Contact our Customer Service Hotline 1(866) 443-3543

for assistance with this product and its operation.

Please direct all returns to the place of the original

purchase. Should this not be possible, contact Hideki

Customer Service Hotline for assistance and to obtain a

Return Merchandise Authorization (RMA). Returns

without a return authorization will be refused. Retain

your original receipt as you may be asked to provide a

copy for proof of purchase.

Hideki Electronics, Inc. reserves the right to repair or

replace the product at our option.
©2008 Hideki Electronics, Inc. All rights reserved.

Weathertime is a trademark of Hideki Electronics, Inc.

The Honeywell trademark is used under license from

Honeywell International Inc. Honeywell International

Inc. makes no representations or warranties with

respect to this product.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

Warning: Changes or modification to this unit not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

NOTE: This equipment had been tested and found to

comply with the limits for a Class B Digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment, installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

There is no guarantee that interference will not occur in

a particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to improve or correct

turning the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV

technician for help.

SPECIFICATIONS

Main Unit

Indoor Temperature

Proposed operating range: -5.0°C to +50.0°C/23.0°F to 122.0°F

Temperature resolution: 0.1°C/0.2°F

User-selectable ( °F or °C ) temperature display

Low battery indicator

Calendar and Clock

12/24 hour display in hh: mm format

Date format: month-day or day-month format

Day of the week: User-selectable in five languages

(English, Spanish, French, German, Italian)

Time Zone manual adjustment

Dual two-minute crescendo alarms with a four minutes snooze

Freeze pre-alarm with programmable time intervals

Wall Mount or Desktop option
Remote Sensor

Remote Temperature

Proposed operating range with alkaline batteries:

-20.0°C to + 70.0°C/-4.0°F to + 158°F

Proposed operating range with lithium batteries:

-38.8°C to + 70.0°C/-38.0°F to +158°F

Temperature resolution: 0.1°C/0.2°F

Low battery indicator

RF Transmission Frequency: 433 MHz

Maximum number of remote sensors: 1 (included)

RF transmission range: Maximum 100 feet (30 meters)

Temperature transmission cycle: approximately 45 seconds

Power

Main unit: 2 AA size (UM-3) 1.5V batteries (not

included)

Remote Sensor: 2 AA size (UM-3) 1.5V batteries (not

included)

Dimensions

Main unit: 2.64(L) x 4.84(H) x 1.02(D) inches

Remote sensor: 2.37(L) x 4(H) x 1(D) inch

DECLARATION OF CONFORMITY

We

Name: Hideki Electronics, Inc.

Address: 7865 SW Mohawk, Tualatin, OR 97062

Telephone No.: 1-503-612-8395

declare that the product

Product No.: TE103NL

Product Name: Wireless Thermometer with Alarm

Clock

Manufacturer: Hideki Electronics Ltd.

Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk

Road, Kwai Chung, New Territories, Hong Kong

is in conformity with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference.

This device must accept any interference received,

including interference that may cause undesired

operation.

The information above is not to be used as a contact

for support or sales. Please call our customer service

hotline (refer to the Standard Warranty

Information) for all injuries instead.

Advertising