Harbor Freight Tools 91010 - Manual (Page 10)

SKU 91010 Page 10
ASSEMBLY AND OPERATING INSTRUCTIONS
CAUTION: Always make sure the Power Cord is unplugged from its electrical outlet
prior to assembling or making any adjustments to the tool.
Attaching and removing the Blower Tube Assembly:
(Please see assembly diagram on next page)
1. Insert the guiding end of the Blower Extension into the Upper Tube. Push the two
sections together firmly until the clip engages. These two pieces together form
the Blower Tube Assembly.
2. Insert the Blower Tube Assembly firmly into the Motor Housing.
3. On the upper part of the Motor Housing, where the Blower Tube Assembly has
been inserted, rotate the Fastener forward, locking the Blower Tube Assembly
into the Motor Housing. Invert the entire assembly and repeat with the Fastener
located on the underside of the Motor Housing.
4. To remove the Blower Tube Assembly, rotate both Fasteners toward the Motor
Housing, then pull the Blower Tube Assembly straight out of the Motor Housing.
REV 09/04