Harbor Freight Tools 91010 - Manual (Page 5)

SKU 91010 Page 5
SERVICE
22. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
23. When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Vacuum Leaf Blower. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
2. Always wear safety impact eye goggles and heavy work gloves when using
the Vacuum Leaf Blower. Using personal safety devices reduce the risk for
injury. Safety impact eye goggles and heavy work gloves are available from
Harbor Freight Tools.
3. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil and other debris. Do not use a power tool in areas near
flammable chemicals, dusts, and vapors. Do not use this product in a damp or
wet location.
4. When using a hand-held power tool, always maintain a firm grip on the tool
with both hands to resist starting torque.
5. Always keep the extension cord away from moving parts on the tool.
6. Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Vacuum Leaf Blower.
7. Do not force the Vacuum Leaf Blower. This tool will do the work better and
safer at the speed and capacity for which it was designed.
8. WARNING! Never reach into this tool while the motor is running; serious
injury may result. Never operate this tool with the Blower Tube Assembly
removed; serious injury may result.
9. Never point the Leaf Blower Vacuum at people or animals.