HONDA 08B21-SJC-102 - Manual (Page 6)

6 of 17
AII 36587 (0705) © 2007 American Honda Motor Co., Inc. - All Rights Reserved.
17. Remove the rear bumper:
• Remove the license plate (two bolts).
• Remove two bolts, six self-tapping screws and
six clips from the rear bumper.
• Pull the rear bumper toward you. Unplug the
two vehicle connectors, and remove the rear
bumper.
• Set the rear bumper on the blanket.
18. Remove the rear roof trim:
• Remove the roof trim nut covers (two retaining
tabs for each cover).
• Remove the two nuts.
• Using a KTC trim tool, carefully pry up the
front of the trim to release the three front clips.
Start with the left clip and work towards the
right clip.
• Gently left the front of the trim to release the
four rear clips.
• Remove the antenna grommet from the roof,
unplug the vehicle connector, and remove the
rear roof trim.
4D19051H
ROOF TRIM
NUT COVER
2 RETAINING
TABS
2 NUTS
REAR ROOF TRIM
4804024H
REAR
ROOF TRIM
ANTENNA
GROMMET
2 HOOKS
2 VEHICLE
CONNECTORS
HIGH-MOUNT
BRAKE LIGHT
GROMMET
4D19062H
LEFT CLIP
(Start here.) CENTER CLIP
(Second.)
RIGHT CLIP
(Finish here.)
7 CLIPS
KTC TRIM TOOL
4 CLIPS
3003063H
2 BOLTS
8 SELF-
TAPPING
SCREWS
6 CLIPS
REAR
BUMPER
BOLTS
LICENSE PLATE
2 VEHICLE
CONNECTORS
www.collegehillshonda.com