HONDA 08B21-SJC-102 - Manual (Page 9)

© 2007 American Honda Motor Co., Inc. - All Rights Reserved. AII 36587 (0705)
9 of 17
28. Remove the tailgate trim:
• Remove the four screws and release the one
end clip on each side.
• Sharply push the tailgate to the right to release
the 16 clips from the trim.
• Remove the 16 clips from the tailgate and
reinstall the 16 clips to the tailgate trim in the
direction shown.
31. Center punch the tailgate at the marks on the
template. Remove the template.
30. Get the template. Using a scissors, cut out the
marked area from the template. Align the edge of
the template with the edge of the tailgate as
shown, and attach it to the tailgate tape.
29. Remove the tailgate panel (seven TORX screws).
4605080T
4 SELF-
TAPPING
SCREWS
2 CLIPS
TAILGATE TRIM
16 CLIPS
TAILGATE
TRIM
4605090T
7 T40 TORX
SCREWS
TAILGATE
PANEL
4707041K
OUTER
TAILGATE
CUT
TEMPLATE
9 TAPES
TEMPLATE
CUT
AREA
TAILGATE
UPPER
HANDLE
4708010K
CENTER
PUNCH
CUT
TEMPLATE
TAILGATE
4 MARKS
TAILGATE
UPPER
HANDLE
www.collegehillshonda.com