Huffy ATVUSB05 - Manual (Page 19)

01/04 P/N 214954E
19
41
39
47
43
43
53
49
52
Insert bolt (47) through left side upper elevator tube (43), then
stretch spring (41) onto bolt (47). Insert bolt (47) through right
side upper elevator tube (43) and secure with nut (39).
Roll completed assembly to desired position. Secure assembly to ground using
anchor strap (52) and tie down stake (53). Fill tank with water (approx. 30 gallons
/115 Liters) or sand (approx. 255 lbs./113 kg) and snap cap (49) in place.
USE EYE PROTECTION
WHEN INSTALLING
SPRINGS.
WARNING!
DO NOT LEAVE
ASSEMBLY UNATTENDED
WHEN EMPTY; IT MAY TIP
OVER.
WARNING!
ADD TWO GALLONS (7.6
LITERS) OF NON-TOXIC
ANTIFREEZE IN SUB-
FREEZING CLIMATES.
CAUTION!
22.
23.