Vehicle spec's, Vehicle specifications, Specifications – Husqvarna HUV4213 User Manual

Page 38

Advertising
background image

Vehicle Specifications

Page 36

2005 HUV4213 Gasoline Vehicle Owner’s Manual

VEHICLE SPECIFICATIONS

SPECIFICATIONS

HUV4213

POWER SOURCE

Engine: 4-cycle OHV, 400 cc, 13 hp rated, single-cylinder, air-cooled, with pressure lubrication system

Fuel system: Side-draft carburetor with float bowl, fixed jets, fuel filters, and impulse fuel pump

Governor: Automatic ground-speed sensing, internally geared in unitized transaxle

Ignition: Transistor electronic ignition with electronic RPM limiter

Unitized transaxle, MC012C-AS00: Fully synchronized forward and reverse with neutral (14.9:1 forward, 20.5:1
reverse) and differential lock feature

Electrical system: 12-volt, 500 cca at 0 °F (-17.8 °C), 650 at 32 °F (0 °C). 105-minute reserve capacity and 35-amp
charging capacity

Torque converter: Automatic, variable-speed, dry type

STEERING/SUSPENSION/BRAKES

Steering: Self-adjusting rack and pinion, Ackerman

Suspension:
Front:
Independent A-arms with coil-over shocks
Rear: Semi-independent suspension with multi-leaf springs and dual hydraulic shocks

Brakes: Hydraulic brake system – self-adjusting drum brakes on each wheel with separate hand-operated park brake

BODY/CHASSIS

Frame/Chassis: Twin I-Beam welded aluminum

Side and rear body: All aluminum

Cargo bed: Powder-coated steel

Front body: ABS/DR acrylic cap

Tires: 23 x 10.50 – 12 tubeless, 4-ply rated load range, front and rear

DIMENSIONS/WEIGHT

Overall length (box bed configuration)

123.4 in. (313.4 cm)

Overall width

54 in. (137 cm)

Overall height (at light bar)

75 in. (187.5 cm)

Wheelbase

80 in. (203 cm)

Ground clearance:
under differential
under foot platform

6.6 in. (17 cm)

11.4 in. (29 cm)

Front wheel tread

43 in. (109 cm)

Rear wheel tread

44.5 in. (111 cm)

Weight (dry):
with all-terrain tread
with turf tread

1106 lb. (493.4 kg)
1066 lb. (477.2 kg)

Forward speed

17-19 mph (27-31 km/h)

Governed RPM: FE400 Engine

3850 (±30) RPM

Curb clearance circle (diameter)

24 ft. 1 in. (734 cm)

Turning radius (per SAE J 695)

139.6 in. (355 cm)

Intersecting aisle clearance

112.2 in (285 cm)

Floorboard height

17 in. (43 cm)

Seat height

35 in. (89 cm)

Specifications continued on next page...

Advertising