HONDA 2010 Civic Coupe - Manual (Page 140)

Each time you press the DISP button,
the display shows you the text data
on a disc, if the disc was recorded
with text data.
With the folder name, you will see
the FOLDER indicator in the display.
The TRACK indicator is shown with
the file or track name.
The display shows up to 16
characters of selected text data (the
folder name, file name, etc.). If the
text data has more than 16
characters, you will see the first 15
characters and the
indicator in
the display. Press and hold the DISP
button until the next 16 characters
are shown.
Insert a disc about halfway into the
disc slot. The drive will pull the disc
in the rest of the way to play it. You
operate the disc player with the
same controls used for the radio.
The number of the current track and
the elapsed time are shown in the
display. When playing a disc in MP3
or WMA, the numbers of the current
folder and file, and the elapsed time
are shown. The system will
continuously play a disc until you
change modes.
You cannot load and play 3-inch
(8-cm) discs in this system.
You can see the album, artist, and
track name in the display. If a disc is
recorded in MP3 or WMA, you can
see the folder and file name, and the
artist, album, and track tag.
When playing a CD-DA with text
data, the album and track name are
shown in the display. With a disc in
MP3 or WMA, the display shows the
folder and file name.
When you insert a disc, and the
system begins to play.
When you change the audio mode
to play a disc with text data or in
MP3 or WMA.
When a new folder, file, or track is
selected.
You will also see some text data
under these conditions:
If you press and hold the DISP
button again, the display shows the
first 15 characters again. Text Data Display Function To Load a Disc
Playing a Disc (Models without navigation system)
134
09/07/07 14:11:29 31SVA640_139