Installing a child seat – HONDA 2010 Civic Coupe User Manual
Page 48
Advertising
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
Adjust the head restraint to its
lowest position. Route the tether
strap over the head restraint,
making sure the strap is not
twisted.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Attach the tether strap hook to the
tether anchor, then tighten the
strap as instructed by the child
seat maker.
4.
6.
5.
7.
Installing a Child Seat
42
Flexible type
TETHER STRAP HOOK
ANCHOR
09/07/07 13:56:15 31SVA640_047
Advertising
This manual is related to the following products: