Havis-Shields KK-K9-C13-K-32 - Manual (Page 3)

KK-K9-C13-K-32_INST_11-08 3
3. INSTALL MOUNTING LEGS:
• Using ¼-20 x ¾” Carriage bolts attach mounting legs to hold down plates.
• Loosely attach hold down plates to floor using existing seat mounting studs and nuts used
to hold down seats.
Note: Use one OEM nut as a spacer under the plate.
4. SLIDE IN K9 MAIN HOUSING:
• Slide in main housing
• Mark & drill 5/16” holes in K9 unit floor where mounting legs and floor come together.
• Mount legs to housing loosely using ¼-20 x ¾” Carriage bolts and serrated nuts.
5. INSTALL TUNNELS AND FILLERS:
• Loosely attach side tunnels to main housing using ¼-20 x ¾” or ½”Carriage bolts (double
or triple skin) and ¼-20 serrated nuts.
• Place cover step in tunnels and mount using #12 x ¾” Stainless Sheet Metal screws.
Rear housing extension should
be attached at this time